Prolink PRT7006H Quick Manual

Prolink PRT7006H Quick Manual

The Prolink PRT7006H is a portable HSPA+ WiFi hotspot that allows you to share your mobile internet connection with up to 10 devices. It supports high-speed data transfer of up to 21.6Mbps and has a built-in battery that can last up to 4 hours of working time. In this article, we will show you how to set up and use your Prolink PRT7006H device.

Prolink PRT7006H Quick Manual

Hardware Installation

To install the hardware, you will need the following items:

• Prolink PRT7006H device

• USB cable

• Power adapter (optional)

• Data SIM card

Follow these steps to install the hardware:

• Insert the data SIM card into the SIM card slot on the side of the device.

• Connect the USB cable to the micro USB port on the device and to a power source (such as a computer or a power adapter).

• Press and hold the power button on the device for about 3 seconds until the LED lights turn on.

• The device will automatically connect to the network and display the signal strength, battery status, and WiFi strength on the LED indicators.

You can also check the device information, such as the SSID, WiFi password, and IP address, by pressing the WPS button on the device for about 3 seconds.

Wi-Fi Mode - Connection Via Wi-Fi

To connect to the internet via Wi-Fi, you will need a Wi-Fi enabled device, such as a laptop, tablet, or smartphone. Follow these steps to connect via Wi-Fi:

• Turn on the Wi-Fi function on your device and scan for available wireless networks.

• Select the network name (SSID) of your Prolink PRT7006H device and enter the password (default is 1234567890).

• You should see a message that indicates that you are connected to the internet.

You can now access the internet using your Prolink PRT7006H device as a Wi-Fi hotspot.

Setting

To configure and manage your Prolink PRT7006H device, you can access its web-based interface using a browser. Follow these steps to access the web interface:

• Make sure that your device is connected to the Prolink PRT7006H network via Wi-Fi or USB.

• Open a browser and enter in the address bar.

• Enter admin as both username and password and click Login.

• You should see the web interface of your Prolink PRT7006H device with various options and settings.

You can use the web interface to change the SSID, password, network mode, security settings, APN settings, firewall settings, and more. You can also check the status of your device, such as the network information, battery level, data usage, and connected devices. For more details, please refer to the [quick installation manual] or [quick manual] of your Prolink PRT7006H device.